Elmack Engg Services | Test and Measurement Distributors

Fluke Calibration

Fluke 5608 Secondary Reference PRTs

Model No :

Fluke 5608

Part Code :

Pls contact us for final configuration

Overview

The Fluke 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches.
When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem.

Both of these probes have Inconel™ sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range

Features

- Temperature: –200 °C to 500 °C (80 mm minimum immersion)
- NVLAP-accredited calibration, lab code 200348-0
- Dry-well reference with 90 ° bend

Major Applications

- Calibration of Temprature sensors

Technical Specifications

- Temperature range : 5608: –200 °C to 500 °C
- Nominal resistance at 0.01 °C : 100 ? ± 0.5 ?
- Temperature coefficient : 0.0039250 ?/?/°C
- Relative Accuracy[1]
• ± 0.007 °C at –200 °C
• ± 0.008 °C at 0 °C
• ± 0.020 °C at 420 °C
• ± 0.027 °C at 660 °C
- Short-term repeatability[2] : ± 0.007 °C at 0.010 °C , ± 0.013 °C at max temp
- Drift[3] : ± 0.01 °C at 0.010 °C , ± 0.02 °C at max temp
- Hysteresis : ± 0.01 °C maximum

General Specifications

- Sensor length : 30 mm ± 5 mm (1.2 in ± 0.2 in)
- Sensor location 3 mm ± 1 mm from tip (0.1 in ± 0.1 in)
- Sheath material : Inconel™ 600
- Minimum insulation resistance : 5608: 500 M? at 23 °C, 20 M? at 500 °C
- Transition junction temperature range[4] : –50 ºC to 200 °C

Datasheet

https://www.elmack.co.in/images/Downloads/Catalogue/Fluke 5608 Secondary Reference PRTs_Datasheet.pdf

Manufacturing details:

https://as.flukecal.com/products/temperature-calibration/probes-sensors/platinum-resistance-thermome